building material sand mix cement mortar
Product features
It has good two-way compatibility, strong cohesive force with base plane and paint primer.
It is ready-mix product, has uniform and stable performance, can be used by opening and adding water and latex, convenient and environmental.
It has good thixotropy, even and smooth, smooth construction, could improve the construction efficiency.
It has excellent crack resistance and water resistance. Eliminate the cracking, sand buckle and peeling phenomenon which caused by traditional 107 glue + white cement.
The leveling facing is exquisite, smooth; reduce the amount of painting and the comprehensive cost.
It is non-toxic and harmless, no radiation, no irritating smell. It does not contain flammable erosion substances, convenient and safe. The good weather resistance ensures the shelf.
Use the Renovation of exterior wall leveling putty, there is base plane without output, this reduce the cost and improve the construction efficiency.
Scope of application
It is suitable for leveling of special rough inorganic plane outside the building, including mortar plaster, concrete, standard block, and brick and so on.
Suitable base plane: mortar plaster, cement concrete, stone wall
Matching paint: waterborne coating, oiliness coating
Treatment of base plane
The base plane should be smooth and strong; no dust, grease, release agents, batik materials and so on.
If the base place is very uneven, leveling it with powder putty for exterior wall for one time. The new plastered cement mortar surface should be maintained for more than 14 days before construction.
If the weather is hot and dry or the porosity of base plane is high, construction should be done after water the base level and waiting until no clear water.
Construction technology
Stir with motor stirrer until even, standing for 5-10 minutes, and stir again will get better result.
Product name | xgz-putty01 general double Component | general single component) | strength double component | renew double component |
Mix the powder and water in the proportion | Powder:additives:water=25:2.5:6-7 | Powder:water=25: 8-9 | Powder:additives:water=25:2.5:6-7 | |
Construction tools | Container, motor stirrer, putty knife, spray and coating tool and grinding tool, etc. | |||
Construction time interval(hr) | >4 | |||
Construction thickness(mm) | 0.8-1.5 | |||
Polishing time | 24-48hours after construction | |||
Curing time | 2-5days, then brush the putty | |||
Attentions
The construction should be done from 5 °C to 40 °C. Control strictly about putty proportion of water and powder, avoid appear product too loose, too low strength because of too much water; or product dry fast and too low strength because of too much powder.
If adding too much water when stirring, should add more powders. The mortar should be used within 4 hours.
SC-313 cannot be plastered on plywood and metal plates directly.
Application
Storage period
Keep in cold and dry place, unopened powder is valid for 1 year, additives is valid for 6 months.
Spec:
25kg/bag
Technical parameters
Surface drying time(Hr) | ≤5 | |
Cohesive strength | standard state (Mpa) | ≥0.6 |
Freeze-thaw cycle (Mpa) | ≥0.4 | |
Alkali resistance (48hr) | No change | |
Water resistance (96hr) | No change | |
Using level (kg/ m²) | 1-1.5 | |
color | White,grey, colored | |
Make buildings more beautiful and more energysaving,Qingdao Xinguangzheng Building Energy-Saving
Development Co., Ltd,the exterior insulation and decoration system solution expert, is your best option,
Qingdao Xinguangzheng Building EnergySaving Development Co., Ltd, is specialized in Building energysaving
Technology development, Building energy-saving material manufacture, Building energy-aving project
undertake. It is the technical innovation enterprise, which offer the totally operation and service delivery.
And it makes scientific research, production, construction, service as a whole. It is an expert at the exterior
insulation and decoration system solution.
The company has passed ISO9001:2008 and ISO14001, certified by CE, China green product logo, etc.
The company has advanced laboratory equipments and highquality personnel, and keeps a close cooperation
with the well-known scientific research agencies, like the Institute of national construction and materials
science, school of architecture, Tsinghua University. We constantly absorb international advanced production
and construction technique. Combining the country situation about building wall construction, insulation
materials, the state climate and geographic feather, etc, we have make a large breakthrough in building energy
saving field. The business scope has expanded multiple product lines, such as polymer mortar powder
production, decorative building coatings, insulation decorative integration board, EPS molding, ect. So as to we
could supply the professional comprehensive and reliable exterior wall insulation and decoration integrated
solution.
Our payment term is 30%TT in advance and balance paid before shipment.
Any need pls contact me freely !